Routing

Expand all | Collapse all

What commands are used to show vlan status and config in MX960?

Jump to Best Answer
  • 1.  What commands are used to show vlan status and config in MX960?

    Posted 04-04-2017 09:22

    Hi MX960 is router. but it looks like the router has some vlan functions. It's diffiult to find some show commands in website. Anyone can provode with some show commands in order to get some vlan status? Thank you



  • 2.  RE: What commands are used to show vlan status and config in MX960?
    Best Answer

     
    Posted 04-04-2017 09:34

    Hi eesunj,

     

    You will find the below kb useful;

    https://kb.juniper.net/InfoCenter/index?page=content&id=KB26487&actp=METADATA

     

    Also commands like below should be useful;

    >show vlans

    >show interfaces media detail | match Link   

     



  • 3.  RE: What commands are used to show vlan status and config in MX960?

    Posted 04-04-2017 10:00

    Thank you so much for your reply. the link is good, but show vlans commands cannot work in MX960.

    This command can tell a lot info:

     

    AB> show bridge ?
    Possible completions:
    domain Show bridge domain information
    flood Show bridging flooding information
    mac-table Show media access control table
    statistics Show bridge statistics information
    {master}