Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  How to Map a Server/PC

    Posted 03-31-2009 18:36

    I am using a SSG140 and has been able to map one server from the web using a public IP.

    I would like to know if there is anyway I could do this without using the public IP, ie from the internet browser, I don't have to enter the IP address but just the server name.

     

    Thanks.


    #dns
    #mapping
    #routing


  • 2.  RE: How to Map a Server/PC
    Best Answer

    Posted 03-31-2009 20:14

    From the way I understand your question, you will need to run Dynamic DNS. It will require something on the server. Here is a site that is highly recommended:

     

    http://www.dyndns.com