Switching

Expand all | Collapse all

L2circuit Local switching on QFX5110

  • 1.  L2circuit Local switching on QFX5110

    Posted 12-21-2020 00:10
      |   view attached

    Hi 

    I am setting up a local l2circuit on a QFX5110, I have the l2circuit up.

    But I am unable to pass traffic across it, on both ports I can get input traffic, but not Output

    Attached config, is there anything obvious I am missing?

    Thanks

    Attachment(s)

    txt
    L2circuit Local.txt   1 KB 1 version


  • 2.  RE: L2circuit Local switching on QFX5110

    Posted 29 days ago

    hello

    l2circuit local switching is not supported on QFX5110. You can configure it, but it wont work.




  • 3.  RE: L2circuit Local switching on QFX5110

    Posted 29 days ago

    Hi

    Is there an official link you know about that states that?

    It would be good to see if available, do you which products do support it?

    Thanks 




  • 4.  RE: L2circuit Local switching on QFX5110

    Posted 29 days ago

    Hi,

    Please look at Juniper Path finder url.

    https://apps.juniper.net/home/qfx5110/features?swName=Junos%20OS&rel=20.3R1

    Thanks




  • 5.  RE: L2circuit Local switching on QFX5110

    Posted 16 days ago
    Hi

    I did get confirmation from the Juniper EX/QFX support team.
    The QFX series devices do not support L2Circuit Local-switching.

    Thanks