Switching

Expand all | Collapse all

Routing Issue on EX45000

Jump to Best Answer
  • 1.  Routing Issue on EX45000

    Posted 03-31-2020 16:04

    Hi,

     

    If I set one IP l3 interface on my swith it works fine.  I can connect to this IP no problem.  However, as soon as I created another L3-interface IP I lost all connections to this switch. What is wrong? Can someone help please?

     

    2020-03-31_19-02-06.jpg



  • 2.  RE: Routing Issue on EX45000
    Best Answer

    Posted 04-01-2020 16:17

    Hi tri.nguyen .

     

    I hope you're doing great.

     

    I have faced similar behavior caused by IP addressing conflict, please check the default gateway and its address to make sure there are no duplicate address or overlapping.


    Please also check the routing if by any chance you have static, go ahead and check that the return route is properly configured.

    Keep me posted.

     

    If this solves your problem, please mark this post as "Accepted Solution" so we can help others too.