View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

  • 1.  Forwarding end-to-end lacp accross l2circuit (EX4550)

    Posted 09-12-2018 01:05

    Hi all

    I have setup l2circuit between two juniper EX4550 running 12.3R12-S7, at the end at each EX, CPE is connected, the CPE port is on lacp, do by default lacp traffic will be forward or tunnel end-to-end accross l2circuit ? if no how can I achieve this with is junos version ?

    Thanks for your reply.


  • 2.  RE: Forwarding end-to-end lacp accross l2circuit (EX4550)
    Best Answer

    Posted 09-13-2018 00:03

    Hi all;

    I had a real case of this, I can confirm lacp traffic is forward also end-to-end accross l2circuit, in others words, any incoming packets on interface attached to l2circuit is forward to the remote end-point interface attached to that circuit. Test done with EX4550 running 12.3R12-S7.