Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

Can bridge domain work alongside ethernet-switching

Jump to Best Answer
This thread has been viewed 1 times
  • 1.  Can bridge domain work alongside ethernet-switching

    Posted 08-17-2020 04:52

    Hi,

     I have the following setup:

    TRAFFIC GENERATOR------R0-------R1------------TRAFFIC GENERATOR

    Is the following scenario valid:

    1. If r0 is an mx box with bridge-domain configured along with corresponding vlans, and interfaces configured as follows:

     

    show interfaces
    xe-7/0/3 {
    vlan-tagging;
    encapsulation flexible-ethernet-services;
    unit 26 {
    encapsulation vlan-bridge;
    vlan-id 26;
    }
    unit 27 {
    encapsulation vlan-bridge;
    vlan-id 27;
    }
    }

     

     2. R1 is a qfx box. Will the traffic flow provided interface r1-r0 is configured as trunk and corresponding vlans are allowed as part of famly ethernet switching? 

     

    Thanks,

    Vinay

     

     


    #bridging
    #Ethenet-switching


  • 2.  RE: Can bridge domain work alongside ethernet-switching
    Best Answer

    Posted 08-17-2020 09:16

    Hello,

     

    Yes it will.

    And You forgot "family bridge" under Your units.

    HTH

    Thx

    Alex