Switching

Expand all | Collapse all

log messages on fpc linecards

Jump to Best Answer
  • 1.  log messages on fpc linecards

     
    Posted 04-16-2019 18:11
      |   view attached

    Hi all,

    There are following log messages ongoing on various fpc linecards. Some of them are below.

    fpc5 ppe_img_ucode_redistribute Failed to evict needed instr to GUMEM - 14 left

    fpc0 ppe_img_ucode_redistribute Failed to evict needed instr to GUMEM - 13 left.

    .......

    ...........

    ................

     

    Output of show chassis fpc errors is attached.

    The case should be concerned or? If yes, what troublehooting approaches can be undertaken?

     

    Thx,

    Erimix

    Attachment(s)



  • 2.  RE: log messages on fpc linecards
    Best Answer

     
    Posted 04-16-2019 18:43

    Hello Arix,

     

    These are supposed to be informational and have no functional impact, so to ignore.  Documented here:

    https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR1298161

     

    Hope this helps.

     

    Regards,
    -r.

    --------------------------------------------------

    If this solves your problem, please mark this post as "Accepted Solution."
    Kudos are always appreciated :).