Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Strange logmessages: "IFCM: no handler for command subtype XXX"

    Posted 06-16-2017 07:25

    Hi experts,

     

    after an upgrade to Junos 15.1R5 I noticed on my EX4550s strange log messages like these:

    ---snip---

    chassism[1179]: IFCM: no handler for command subtype 178
    chassism[1179]: IFCM: no handler for command subtype 179

    ---snap---

     

    Are these pointing to an error?

    Can I safely igore them?

     

    Many thanks in advance,

    Stefan


    #logmessageIFCMchassism


  • 2.  RE: Strange logmessages: "IFCM: no handler for command subtype XXX"

     
    Posted 06-16-2017 07:48

    Hello,

     

    This message is related to child interface of a LAG.

    If the LAG and/or their child interfaces are not flapping, you can ignore this message as per my information.

     

    Regards,

     

    Rushi



  • 3.  RE: Strange logmessages: "IFCM: no handler for command subtype XXX"

    Posted 06-17-2017 19:36

    HI

     

    These are harmless messages and they appear when the LC had already deregistered and shouldnt get any messages from RE.

     

    https://prsearch.juniper.net/PR709088

     

    Thanks

    Partha