Switching

 View Only
last person joined: yesterday 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

  • 1.  QFX 5100 l2-learning subsystem is not running

    Posted 03-20-2019 09:17

    Hello,

    I have 2 QFX 5100 in virtual chassis mode

    I don't know why but now i can not add more and when i try to show the vlan i have this error:

    show vlans
    error: the l2-learning subsystem is not running

     

    I found nothing on the documentation about this error

     

    Model: qfx5100-48s-6q
    JUNOS Base OS Software Suite [13.2X51-D10.6]
    JUNOS Base OS boot [13.2X51-D10.6]
    JUNOS Crypto Software Suite [13.2X51-D10.6]
    JUNOS Online Documentation [13.2X51-D10.6]
    JUNOS Kernel Software Suite [13.2X51-D10.6]
    JUNOS Packet Forwarding Engine Support (qfx-5) [13.2X51-D10.6]
    JUNOS Routing Software Suite [13.2X51-D10.6]
    JUNOS Enterprise Software Suite [13.2X51-D10.6]
    JUNOS Web Management [13.2X51-D10.6]
    JUNOS py-base-i386 [13.2X51-D10.6]
    JUNOS Host Software [13.2X51-D10.6]

    Thks for your help


    #qfxvlan


  • 2.  RE: QFX 5100 l2-learning subsystem is not running

    Posted 03-20-2019 11:39

    hello Max

     

    So what this means is that the l2ald which is the l2 learning daemon is not running, are you running the command from the master? you should see master, backup or linecard in your terminal like this 

    {master:1}[edit]
root@SWITCH#

     

    is the VC actually truly formed? 

    >show virtual-chassis status

    perhaps it is in linecard mode and it doesnt run the l2 learning daemon?

    if you are in the master and l2ald is not running there is something wrong the process should start with the device check that out first.



  • 3.  RE: QFX 5100 l2-learning subsystem is not running

    Posted 03-20-2019 11:47
    @carloscalvo wrote:

    hello Max

     

    So what this means is that the l2ald which is the l2 learning daemon is not running, are you running the command from the master? you should see master, backup or linecard in your terminal like this 

    {master:1}[edit]
root@SWITCH#

     

    is the VC actually truly formed? 

    >show virtual-chassis status

    perhaps it is in linecard mode and it doesnt run the l2 learning daemon?

    if you are in the master and l2ald is not running there is something wrong the process should start with the device check that out first.

    Hi

    virtual-chassis is OK

    i restart l2-learning service and now it's OK

    Thks for your help !