Switching

Expand all | Collapse all

ACX1100 how to set a trunking interface ?

Jump to Best Answer
  • 1.  ACX1100 how to set a trunking interface ?

    Posted 02-02-2015 08:13

    Hello , Junos Guys :

    As tittle says , I need to set some trunking interfaces for my ACX1100 concentrator.

    Basicaly I wll receive tagged traffic over four cupper interfaces and take  this traffic over a fiber interface to my core that will receive also tagged traffic.

     

    How should it be done?

    On my mx860 I achieved this doing:

     

    flexible-vlan-tagging;
    encapsulation flexible-ethernet-services;
         unit 0 {
              description Connection_to_swtich1;
                  family bridge {
                     interface-mode trunk;
                     vlan-id-list [ 10 100 3 ];
               }
    }

     

    But ACX1100 does not have the same options from console (for instance "interface-mode-trunk" is missing).

    Where can I found configure documentation for this device?

    Also , is j-web available for ACX1100 ?

     

    Regards ,

    Leandro.

     

     

     



  • 2.  RE: ACX1100 how to set a trunking interface ?
    Best Answer

     
    Posted 02-02-2015 23:12

    I don't know what release are you running, but you can start from here:

     

    http://www.juniper.net/techpubs/en_US/junos12.3x54-D15/information-products/pathway-pages/acx-series/acx-series.pdf

     

    Check chapter 4.

     

    I don't have an ACX to test if j-web is there, but I don't see it in the features:

     

    http://pathfinder.juniper.net/feature-explorer/displayFeatures.html?rt=1&swName=Junos%20OS&release=12.3X54-D10&platform=ACX1000

     

    Others can comment if j-web is supported.




    =====

    If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.



  • 3.  RE: ACX1100 how to set a trunking interface ?

    Posted 02-03-2015 11:23

    Thanks for your help mr et:

    I have already readed this docs, it leaded me to get the following config:

    Lets suppose Ihave two access ports on vlan 2 (0/0/1 and 0/0/2) and a trunk interface 0/0/3

    I can do:

     

    leo@1100# show bridge-domains         
    VLAN-2 {
        domain-type bridge;
        vlan-id 2;
        interface ge-0/0/3.2;
        interface ge-0/0/2.0;
        interface ge-0/0/1.0;
    }


    leo@1100# show interfaces ge-0/0/1  
    encapsulation ethernet-bridge;
    gigether-options {
        flow-control;
    }
    unit 0;

    leo@1100# show interfaces ge-0/0/2  
    encapsulation ethernet-bridge;
    gigether-options {
        flow-control;
    }
    unit 0;


    leo@1100# show interfaces ge-0/0/3    
    description "Trunk port"
    flexible-vlan-tagging;
    media-type copper;
    encapsulation flexible-ethernet-services;
    unit 2 {
        encapsulation vlan-bridge;
        vlan-id 2;
    }
    unit 3 {
        encapsulation vlan-bridge;
        vlan-id 3;
    }
    unit 4 {
        encapsulation vlan-bridge;
        vlan-id 4;
    }

     

    I think it is not good when you have too many vlans.

    Is there an alternative ???

    Thanks in advance.

    Leandro.

     

     

     



  • 4.  RE: ACX1100 how to set a trunking interface ?

    Posted 06-28-2018 18:00

    I have the same problem with an ACX5048 could you solve it?



  • 5.  RE: ACX1100 how to set a trunking interface ?

     
    Posted 06-29-2018 03:07

    What junos version are you running on the ACX?

     

    I see the MX version posted above is supported on ACX 15.1

     

    flexible-vlan-tagging;
    encapsulation flexible-ethernet-services;
         unit 0 {
              description Connection_to_swtich1;
                  family bridge {
                     interface-mode trunk;
                     vlan-id-list [ 10 100 3 ];
               }
    }



  • 6.  RE: ACX1100 how to set a trunking interface ?

    Posted 06-29-2018 03:28

    Interface-mode trunk is not supported on acx



  • 7.  RE: ACX1100 how to set a trunking interface ?

    Posted 06-29-2018 03:29

    Hi Diego,

     

    What is your exact requirement?

     

    Can you open a new thread and share the details?