Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  exchanging (leaking) directly connected routes across routing instances is not supported

    Posted 08-29-2012 07:54

    Hi  All,

    I found this http://kb.juniper.net/InfoCenter/index?page=content&id=KB23027 on KB regarding exchanging route between routing instance.

    Does this problem still valid on newest EX Junos 11.0

     

    Thx



  • 2.  RE: exchanging (leaking) directly connected routes across routing instances is not supported

    Posted 08-29-2012 08:11
    Hi, This looks like a PFE limitation, so would be present in all the EX boxes that use the same chip on which the limitation was found. Thanks, ankit


  • 3.  RE: exchanging (leaking) directly connected routes across routing instances is not supported

    Posted 08-29-2012 08:18

    HI ankit,

     

    Thanks for your response, so even using latest junos this limitation still found?



  • 4.  RE: exchanging (leaking) directly connected routes across routing instances is not supported
    Best Answer

    Posted 08-29-2012 08:25
    Yes, you're right. Basically, this is a limitation of the chip and not of the software, hence it's independent of the software version. Thanks, ankit
    #routing-instance
    #routeleaking
    #directroutes