i want to use 2x QFX3500 as virtual chassis as my core switching and i have following featurs :
8-9 BGP Peers with no full tables,
10k Routes in worst case
40-50k mac address in worst case
i want to have 6-7 firewall access list to control input traffic and some traffic wchih is forward thought the switch
2-3x PBR which assign to my Vlan
700x VLAN and SVI (and each vlan has its own ip or secondary ips)
i want to know can QFX3500 handle these features perfectly with less cpu usages?
and i want to know how many SVI can i have in qfx3500 ? for example n3k-c3064pq-10gx suggested that we can have 1024 SVI
QFX3500 in a VC should be able to handle that seemlessly. you can refer the the below doc for scaling limits of QFX3500 and your requirement falls well within the range of that.
If this solves your problem, please mark this post as "Accepted Solution".If you think that my answer was helpful, please spend some Kudos.