This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Expand all | Collapse all

How to skip the Junos Initial setup wizard

Jump to Best Answer
  • 1.  How to skip the Junos Initial setup wizard

    Posted 09-04-2019 08:58



    Every time i access the srx via its IP in the browser i get the setup wizard. I only want to access to check the logs. 

    How can I skip the wizard?


    I tried this: 

    root@SRX# delete system autoinstallation delete-upon-commit 

    but it didn't work.


    thanks in advance


  • 2.  RE: How to skip the Junos Initial setup wizard
    Best Answer

    Posted 09-04-2019 21:49

    Hi Hbaytie,


    Can you please double-check whether autoinstallation is deleted properly?


    user@host> show configuration system | displays set | match autoinstallation


    If it displays the result, please delete it once again.


    user@host# delete system autoinstallation 

    user@host# commit


    Post making the change, clear browser cookie or open the browser using incognito mode and try accessing J-Web.

  • 3.  RE: How to skip the Junos Initial setup wizard

    Posted 09-05-2019 01:40

    You were totally right, it was still there. Thank a lot.


    SRX> show configuration system | display set | match auto

    set system autoinstallation
    set system license autoupdate url https://ae1.juniper.net/junos/key_retrieval

    SRX# delete system autoinstallation

    SRX# commit


    I accessed again and it worked.