SRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Class of Service with Tunnels

  • 1.  Class of Service with Tunnels

    Posted 02-25-2022 10:01
    Hi!

    I have a question about how CoS works with IPSec tunnels.
    If I configure CoS on a physical interface, the scheduler will look at the available bandwidth based on the default bandwidth for the interface, or the bandwidth statement if it exists.

    On a logical interface, like st0,  there is no default bandwidth. Also, the bandwidth statement does not exist.

    So, how does CoS know if an st0 interface is reaching its maximum bandwidth? Does it get this from the underlying interface that the tunnel is built on?
    Or, should I be configuring shaping on the tunnel to tell CoS the max bandwidth?


    Thanks for your help