SRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Experiencing slowness with IKEV2 IPSEC site to site tunnel between SRX 1500 and SRX4600

  • 1.  Experiencing slowness with IKEV2 IPSEC site to site tunnel between SRX 1500 and SRX4600

    Posted 05-03-2022 05:52
    Hi Folks,

    I am experiencing slowness when performing data transfer from a source to a destination over an IKEV2 IPsec tunnel. On the source, we have SRX 1500, and destination end we have SRX 4600.  Transfer speeds are going up and down all the time. In the reverse direction, we are getting better transfer speeds that are stable. We have similar configs in other locations and there are no issues. IPSEC VPN MSS is set to 1350. Any help in this case will be highly appreciated

    ------------------------------
    SANDEEP SURESH
    ------------------------------