SRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  SRX340 SkyATP enrollment using single routing instance

    Posted 05-02-2022 15:46

    Hi all,

    trying to enroll srx340 devices with sky atp. I've tried on firmware versions 19.2R2.7 and 19.4R3-S1.3. I'm assuming I need to leak routes from routing instance table to inet.0 routing table (default routing instance). Any feedback or tips is appreciated, as I've tried everything. Licensing has also been applied on these devices as well for sky atp, devices have been enabled for advanced anti malware and restarted. 

    I've read through this link:

    https://www.juniper.net/documentation/us/en/software/sky-atp/sky-atp/topics/task/sky-atp-device-enrolling.html


    I've made the following configurations following this link:
    CEC Juniper Community

    Juniper remove preview
    CEC Juniper Community
    View this on Juniper >






    ------------------------------
    DEREK HILL
    ------------------------------



  • 2.  RE: SRX340 SkyATP enrollment using single routing instance

    Posted 05-03-2022 05:53
    Hi Derek
    you might refer the following link for SkyATP quickstart. I also recommend you upgrade the firmware to 20.1RX. It's more reliable  then 19.x version. Thanks

    https://www.juniper.net/documentation/us/en/day-one-plus/atp-cloud/id-step-1-begin.html

    BR,
    Terry

    ------------------------------
    Lin Yung Hsiang
    ------------------------------