SRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Juniper automation is slow

  • 1.  Juniper automation is slow

    Posted 12-12-2021 05:21
    Hello,

    I'm trying to perform a thousand request from terraform to juniper using netconf. 

    I try on different juniper: 
    v-srx 4gb 4vcpu
    srx300
    srx1500

    Terraform connect to the juniper device, run a show command to get the state of every objects. And this is very slow on all juniper except the virtual srx appliance

    Example, running this command:
    ssh netconf@ip -i key -s netconf
    Take less than 1sec on v-srx and around 3sec on the srx300 or 1500.


    I try to monitor CPU and RAM on both firewall and everything seem ok. i try different auth method but without success.

    Can someone tell me what can reduce the performance on a physical appliance while my virtual appliance showing a much faster output.
    Maybe there is some tweak that can be applied ?

    Thanks you,


    ------------------------------
    Oliver Duruiss
    ------------------------------