Hi,
I have a requirement where I need to create a source NAT pool where the addresses/prefixes are not built on any interfaces. I then need to advertise this NAT pool via BGP to an adjacent SRX4600.
To get around this I have created a static route with next-hop discard to install the route in the table. I then add the NAT pool network to a policy statement and apply this to the BGP peer export list.
The problem is on the adjacent SRX4600 the NAT pool route only shows when running show route receive-protocol bgp hidden. Why is this route showing as hidden and what could be the workaround so it appears as an active route?
------------------------------
Jack
------------------------------