View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

SRX340 21.2R1.10 "Interface Table" SNMP Query fails continously

  • 1.  SRX340 21.2R1.10 "Interface Table" SNMP Query fails continously

    Posted 10-25-2021 07:03

    Hello there,

    We updated our SRX340s a few months ago to version 21.2R1.10.  
    Since then we came across an ongoing error, which is confusing our monitoring System.
    the active cluster-node runs into an error on the snmp request for the interface table. This error occures kind of frequently, but is not always there.
    Some times the query is working, but most of the time there is either no response at all, or corrupted date in the response.
    This flapping status is only registered on the actual active node. The secondary node has no problems with this query. 

    After we did a manual failover to the other device, the Error was away for about 24hrs. Then it came back.

    has anyone an idea? do i have to update the nodes to 21.3?

    Patrick Hackert