I know what my design is, the problem with that design is the term 'revenue ports' since the stream syslog documentation only says that the traffic can't exit an fxp0 port, but can only exit a revenue port, and google doesn't return any results for "define" juniper" "revenue port".
So, I inquired here, and I have several different defintions of 'revenue port'.
Also, I know that st0 ports are for virtual tunnels, i have a many of them. I also know lt-0/0/0 is for inter-vr communication. none of that matters if they aren't revenue ports or if the documentation is wrong by omission.
------------------------------
Theodore
------------------------------
Original Message:
Sent: 12-16-2020 01:30
From: Unknown User
Subject: revenue ports on an srx1500
Hi,
st0 is for tunnel. lt0 is for internal link usually for VR to VR.
You need to know your design first.
Thanks
Original Message:
Sent: 12-15-2020 16:55
From: Theodore Van Iderstine
Subject: revenue ports on an srx1500
Yes, I want to know which of these ports can be used as the source of a syslog stream:
ae0.0
reth0.0
st0.0
lt-0/0/0.0
------------------------------
Theodore
Original Message:
Sent: 12-15-2020 07:32
From: Hussam Baytie
Subject: revenue ports on an srx1500
HA ports are used control so they are not revenue.
Are you searching for anything specific?
For me, revenue ports are ports that carry your real business data/traffic and the reason you make revenue.
------------------------------
Hussam Baytie (HTB)
Presales Systems Engineer
Mindware KSA
Original Message:
Sent: 12-15-2020 05:37
From: Theodore Van Iderstine
Subject: revenue ports on an srx1500
do MGT ports include HA ports?
------------------------------
Theodore
Original Message:
Sent: 12-15-2020 05:16
From: Unknown User
Subject: revenue ports on an srx1500
Hi,
All the port on srx1500 is revenue port except "MGT" port.
Thanks
Original Message:
Sent: 12-15-2020 04:51
From: Theodore Van Iderstine
Subject: revenue ports on an srx1500
I'm not sure what you mean. If I have an SRX with the following intefaces:
ge-0/0/0.0
xe-2/0/1.0
et-3/0/0.0
ae0.0
st0.0
which of these interfaces can be used to transmit stream syslog off of the SRX?
------------------------------
Theodore
Original Message:
Sent: 12-15-2020 01:34
From: Unknown User
Subject: revenue ports on an srx1500
As a general term, revenue port is any port that carries non-management or non-control traffic. ae0.x and st0.x are interfaces, not ports but could be called revenue interfaces. Some people would further consider the definition of revenue ports to be restricted to those serving paying customers, which would therefore exclude ports dedicated to backup networks or transit routing.
Original Message:
Sent: 12-14-2020 14:41
From: Theodore Van Iderstine
Subject: revenue ports on an srx1500
I'm looking for an answer to the question "what is a revenue port" and I can't find any definitive answer. I understand that fxp0 ports are NOT revenue ports, but I haven't been able to find out whether all other ports are considered revenue ports or if they have to be physical ports. This page lists all of the port types: https://www.juniper.net/documentation/_en_US/junos/topics/topic-map/router-interfaces-overview.html but nowhere on this page does it indicate which ports are considered revenue ports.
For example, I understand that ge-0/0/0 is a revenue port, but this this mean that ae0 is also a revenue port because one of its members is ge-0/0/0 (a revenue port)?
What about st0.x ports? lt-x/x/x ports?
------------------------------
Theodore
------------------------------