View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

  • 1.  SRX1500 Unable to use VLAN1

    Posted 11-30-2021 13:34
    I have a site that utilizes VLAN 1. However, with the SRX1500 I am unable to assign VLAN 1 . Has anyone else been able to use VLAN 1 or found a work around?

    set vlans DATA vlan-id 1

    SRX1500# commit
    [edit vlans]
    VLAN 1 is a reserved vlan. This vlan cannot be configured by user.
    [edit vlans]
    Failed to parse vlan hierarchy completely
    error: configuration check-out failed


  • 2.  RE: SRX1500 Unable to use VLAN1

    Posted 11-30-2021 19:27
    zeroizing and loading factory defaults resolved my issue.

    Jim Backer
    Senior Network Engineer | JNCIP-ENT