Ask the Expert


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

  • 1.  Firwall srx /delete security zones

    Posted 04-05-2021 20:22
    hello  sir :
     ian new with SRX firewall ,i am trying to delete unused APN, everything look ok for the work order, but each time I receive this error (( referenced address must be defined under address-book )) ,,, the work order is just two statement..

    delete security nat source rule-set PAT1 rule 3 match source-address
    delete security zones security-zone Trust address-book address 3G_src_addr20  this line is not deleted ..

    thanks in advance for help

    saif salah


  • 2.  RE: Firwall srx /delete security zones

    Posted 04-08-2021 19:57
    This message is telling you the address object you are trying to delete: 3G_src_addr20
    Is being used by a policy somewhere.  So before the object can be deleted the policy must also be removed.

    If you use this command you can find the location of the policy to remove.
    show security policy | display set | match 3G_src_addr20

    From here the delete the policies that are found.

    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)