Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
Jweb port is 'X' and Juniper secure connect port is also 'X' in juniper, when i am changing the port jweb port from 'X' to 'Y', then Juniper secure connect port also got changed to 'Y'.
I want to separate these (JWEB & JSC) ports.
1. For Jweb it should be https://x.x.x.x:2234
2. And For JSC https://x.x.x.x:4325
There is no option available to change the ports used for these services on the SRX.
The only option here is to control which interfaces are configured for the two protocols so you can have both working but on different interfaces.
I have create a certificate for JSC SSL VPN and associate it to web service management, therefore both jweb and JSC are using same port. Can you please tell any other way to disable the JSC Public web access ?
Yes, they are using the same standard port for the ssl connection. But when you configure JSC and Jweb you choose which SRX interface the service is active on.
So the JSC would be on your externally facing interface and the Jweb management would be on your internal secure interface.
You can add multiple certificates with different domains as needed in the certificate configuration section so that both are usable as well.