Junos OS

 View Only
last person joined: 15 hours ago 

Ask questions and share experiences about Junos OS.

Upgrade EX4600 switch Prblem

  • 1.  Upgrade EX4600 switch Prblem

    This message was posted by a user wishing to remain anonymous
    Posted 02-01-2023 06:44
    This message was posted by a user wishing to remain anonymous

    Hello ,

    I have tried to upgrade our EX4600 stack .

    You will find below, the error log feedback during both types of upgrade attempts on this stack.

    --- "NSSU upgrade" ---
    root@SW-EX4600> request a non-stop software upgrade to /var/tmp/jinstall-ex-4600-17.3R3-S8.1-signed.tgz
    Chassis Check DONE
    [Jan 21 16:29:42]:ISSUE: Image validation
    [21 Jan 16:29:42]:ISSUE: Preparing Backup RE
    Install image on other FPC with backup

    [Jan 21 16:29:56]: Software Image Recovery. This process can take several minutes. Be patient.

    Retrieving version and model information from/var/tmp/jinstall-ex-4600-17.3R3-S8.1-signed.tgz
    From package/var/tmp/jinstall-ex-4600-17.3R3-S8.1-signed.tgz

    Download completed for package/var/tmp/jinstall-ex-4600-17.3R3-S8.1-signed.tgz
    Push the beam to fpc1
    ERROR: Cannot install jinstall-ex-4600-17.3R3-S8.1-signed on ex4600-40f
    error: fpc1 response failed to read
    error: DUE Aborted! RE backup may be in an inconsistent state, Please restore RE backup
    [Jan 21 16:36:10]:ISSUE: Error
    Abandoned MADE chassis
    [Jan 21 16:36:10]:ISSUE: IDLE


    --- "upgrade standard" ---
    root@SW--EX4600> system software request add/var/tmp/jinstall-ex-4600-15.1R7.8-domestic.tgz

    Check pending installation on fpc1

    Check pending installation on fpc0
    Push the /var/tmp/jinstall-ex-4600-15.1R7.8-domestic.tgz package to fpc1

    Validation on fpc1
    ERROR: Cannot install jinstall-ex-4600 on ex4600-40f

    Can you tell us what was the problem and how to fix it?

    Best Regards,
    Jamaludeen