So i was able to get the USB working but now i keep getting Device NOT ready Request Sense returned 06 28 00. I erased flashed an rebooted it but getting the same result. Is this 3300 bricked? I am going to try unmounting /var and see if that works.
------------------------------
ANKUR
------------------------------
Original Message:
Sent: 05-30-2023 10:02
From: ANKUR V
Subject: Unable to load Junos
Unfortunately these are EOL and are no longer under support
------------------------------
ANKUR
Original Message:
Sent: 05-27-2023 20:01
From: EDUARDO MENDEZ
Subject: Unable to load Junos
Hi ankury,
My opinion is that; You should open Jtac.
------------------------------
EDUARDO MENDEZ
Original Message:
Sent: 05-26-2023 14:41
From: ankurv
Subject: Unable to load Junos
EX3300 is stuck on loading junos and even with multiple reboot wont start found a few core dumps and on prompt keep getting
"root@:LC:0% cli
could not open user interface connection: management daemon not responding
Retry connection attempts ?
I formated a USB and loaded 15.1R7.9 and at loader prompt i gave install --format file:///jinstall-ex-3300-15.1R7.9-domestic-signed.tgz. but i keep getting error message " install not found" , how do i get around this and load from USB?
------------------------------
ANKUR
------------------------------