Routing

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.
  • 1.  SSh sessein róver layer 2

    Posted 17 days ago
    Hi guys
    i want to connect two mx router over a layer 2 network.
    Target of my project is to connect with my PC ( ssh)  to the second mx to make changes on the configuration.
    In the same layer 2 segment i can ping the mx2.....from my pc i can not ping or make a ssh session.
    i do not understand why....
    Can somebode help me,,,,see picture



  • 2.  RE: SSh sessein róver layer 2

    Posted 17 days ago
    Should the text on the red line read "Ping from 10.10.11.2 to 10.10.10.2 not ok"?

    Is it not just that MX2 doesn't have a route to 10.10.11.0/24?


  • 3.  RE: SSh sessein róver layer 2

    Posted 17 days ago
    Hi, thanks for the fast answer.
    Yes, you are right an i can not ping from 10.10.11.2 ( my PC ) to the router.
    The ip on the mx 2 are only on the interface ge-1/1/1.
    And I don´t know where I must configure the route for the subnet 10.10.11.0/24


  • 4.  RE: SSh sessein róver layer 2
    Best Answer

    Posted 13 days ago
    On MX2, configure a static route for 10.10.11.0/24 and point it to 10.10.10.1 as the next-hop IP.

    ------------------------------
    Sheetanshu Shekhar
    ------------------------------



  • 5.  RE: SSh sessein róver layer 2

    Posted 12 days ago
    Thanks, works fine.