Automation

good day folks,

does anyone have a working script to automate an image pull of an srx firmware from a dhcp server then execute the upgrade?

e.g:
1.use an existing srx to be a repository of the image under the /var/tmp directory
2.save the image to /var/tmp of an srx configured to be a dhcp server
3.create a script to pull the image from a dhcp srx /var/tmp and save it in another srx where the upgrade has to be made under /var/tmp directory
4.once the pull is finished, the script will run that image with all the requisites details;
     -dhcp server ip
     -root account 
    -/var/tmp folder
    -the commands and the switch (e.g no-reboot no-copy)

The goal is to minimize the manual upgrade if I have 10 srx or EX devices.

TIA,
Leangf

------------------------------
Leangf Leangf
------------------------------

Hi Leangf,

I think you can find the starting point in Juniper Day One Bookhttps://www.juniper.net/documentation/en_US/day-one-books/DO_PyEZ_Cookbook.pdf at recipe 16.

Thanks,
Adrian.

------------------------------
Teodor Adrian Soroceanu
------------------------------

Original Message:
Sent: 01-05-2023 21:30
From: Leangf Leangf
Subject: script to automate upgrade

good day folks,

does anyone have a working script to automate an image pull of an srx firmware from a dhcp server then execute the upgrade?

e.g:
1.use an existing srx to be a repository of the image under the /var/tmp directory
2.save the image to /var/tmp of an srx configured to be a dhcp server
3.create a script to pull the image from a dhcp srx /var/tmp and save it in another srx where the upgrade has to be made under /var/tmp directory
4.once the pull is finished, the script will run that image with all the requisites details;
     -dhcp server ip
     -root account 
    -/var/tmp folder
    -the commands and the switch (e.g no-reboot no-copy)

The goal is to minimize the manual upgrade if I have 10 srx or EX devices.

TIA,
Leangf

------------------------------
Leangf Leangf
------------------------------

Hello Adrian,
I installed an Ansible in a macos. 

Followed instructions, so far everything is working. 

a prerequisites on the junos device, it should have nefconf enabled. In my case , i intend to use the cliconf..

https://docs.ansible.com/ansible/latest/collections/junipernetworks/junos/junos_cliconf.html#ansible-collections-junipernetworks-junos-junos-cliconf

any thoughts on how to add/ edit this modules?

tia,
leangf

------------------------------
Leangf Leangf
------------------------------

Original Message:
Sent: 01-06-2023 02:41
From: Teodor Adrian Soroceanu
Subject: script to automate upgrade

Hi Leangf,

I think you can find the starting point in Juniper Day One Bookhttps://www.juniper.net/documentation/en_US/day-one-books/DO_PyEZ_Cookbook.pdf at recipe 16.

Thanks,
Adrian.

------------------------------
Teodor Adrian Soroceanu

Original Message:
Sent: 01-05-2023 21:30
From: Leangf Leangf
Subject: script to automate upgrade

good day folks,

does anyone have a working script to automate an image pull of an srx firmware from a dhcp server then execute the upgrade?

e.g:
1.use an existing srx to be a repository of the image under the /var/tmp directory
2.save the image to /var/tmp of an srx configured to be a dhcp server
3.create a script to pull the image from a dhcp srx /var/tmp and save it in another srx where the upgrade has to be made under /var/tmp directory
4.once the pull is finished, the script will run that image with all the requisites details;
     -dhcp server ip
     -root account 
    -/var/tmp folder
    -the commands and the switch (e.g no-reboot no-copy)

The goal is to minimize the manual upgrade if I have 10 srx or EX devices.

TIA,
Leangf

------------------------------
Leangf Leangf
------------------------------

Hi Leangf,

I am not familiar with cliconf, but if you could shed more info on what you are trying to achive or what does not work we can take a look.

Thanks,
Adrian.

------------------------------
Teodor Adrian Soroceanu
------------------------------

Original Message:
Sent: 01-09-2023 03:40
From: Leangf Leangf
Subject: script to automate upgrade

Hello Adrian,
I installed an Ansible in a macos. 

Followed instructions, so far everything is working. 

a prerequisites on the junos device, it should have nefconf enabled. In my case , i intend to use the cliconf..

https://docs.ansible.com/ansible/latest/collections/junipernetworks/junos/junos_cliconf.html#ansible-collections-junipernetworks-junos-junos-cliconf

any thoughts on how to add/ edit this modules?

tia,
leangf

------------------------------
Leangf Leangf

Original Message:
Sent: 01-06-2023 02:41
From: Teodor Adrian Soroceanu
Subject: script to automate upgrade

Hi Leangf,

I think you can find the starting point in Juniper Day One Bookhttps://www.juniper.net/documentation/en_US/day-one-books/DO_PyEZ_Cookbook.pdf at recipe 16.

Thanks,
Adrian.

------------------------------
Teodor Adrian Soroceanu

Original Message:
Sent: 01-05-2023 21:30
From: Leangf Leangf
Subject: script to automate upgrade

good day folks,

does anyone have a working script to automate an image pull of an srx firmware from a dhcp server then execute the upgrade?

e.g:
1.use an existing srx to be a repository of the image under the /var/tmp directory
2.save the image to /var/tmp of an srx configured to be a dhcp server
3.create a script to pull the image from a dhcp srx /var/tmp and save it in another srx where the upgrade has to be made under /var/tmp directory
4.once the pull is finished, the script will run that image with all the requisites details;
     -dhcp server ip
     -root account 
    -/var/tmp folder
    -the commands and the switch (e.g no-reboot no-copy)

The goal is to minimize the manual upgrade if I have 10 srx or EX devices.

TIA,
Leangf

------------------------------
Leangf Leangf
------------------------------