Routing

 View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.
  • 1.  Route fxp port to internet

    Posted 06-07-2023 15:25

    Hello Communities,

    Im using a SRX cluster is datacenter perimetre and a PALO in for internet access. we have OOB management network to manage our devices.

    My question is, how can i configure my SRX5600 to use the fxp port to access internet ?

    Best Regards.



    ------------------------------
    OUSMANE NATHA DIARRA
    ------------------------------


  • 2.  RE: Route fxp port to internet

    Posted 06-08-2023 01:53

    Hi,

    U can try look on "management_instance" knob.

    Thanks




  • 3.  RE: Route fxp port to internet

    Posted 06-13-2023 08:02

    Hello Kronicklez,

    Thanks for your feedback.

    Best Ragerds



    ------------------------------
    OUSMANE NATHA DIARRA
    ------------------------------



  • 4.  RE: Route fxp port to internet

    Posted 06-08-2023 08:15

    The important concept for your design here is that the fxp interface cannot use the other interfaces on the SRX for outbound routing.  This is designed to be isolated for mgmt access only.

    So as Kronicklez notes, you need to configure the management instance as a fully separate routing table and then design the outside of the SRX routing such that this mgmt instance would have access to the internet or other subnets needed.



    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------



  • 5.  RE: Route fxp port to internet

    Posted 06-13-2023 08:04

    Hello Spulika,

    Thanks for your reply.

    Best Regards



    ------------------------------
    OUSMANE NATHA DIARRA
    ------------------------------