I have the following LDP topology:
R1 -- R2 -- R3 – R5
+ --- R4 -- +
If configured a load balancing policy on R2 that results in load balancing of packets towards FEC R5.
jcluser@P# run show route forwarding-table label 16 | find R2
Logical system: R2
Routing table: default.mpls
Destination Type RtRef Next hop Type Index NhRef Netif
16 user 0 ulst 1048575 2
220.127.116.11 Swap 16 902 2 lt-0/0/0.5
18.104.22.168 Swap 16 903 2 lt-0/0/0.3
What are the fields in the incoming MPLS packet that R2 looks at by default to decide on the next hop towards FEC R5?
Juniper Business Use Only