Hi,
Here's the chassis details, note there should be 2 SR and 2 RJ45 Modules. Only the SR modules are showing:
Hardware inventory:
Item Version Part number Serial number Description
Chassis XH37230XXXXX JNP48Y8C-CHAS
Pseudo CB 0
Routing Engine 0 BUILTIN BUILTIN RE-QFX5120-48Y-8C
FPC 0 REV 16 650-083242 XH37230XXXXX JNP48Y8C-CHAS
CPU BUILTIN BUILTIN FPC CPU
PIC 0 BUILTIN BUILTIN 48x25G-8x100G
Xcvr 1 REV 01 740-021308 N8NXXXX SFP+-10G-SR
Xcvr 2 REV 01 740-021308 N8NXXXX SFP+-10G-SR
Power Supply 0 REV 04 740-070749 1GG5C4XXXXX JPSU-650W-AC-AO
Power Supply 1 REV 04 740-070749 1GG5C4XXXXX JPSU-650W-AC-AO
Fan Tray 0 fan-ctrl-0 0, Front to Back Airflow - AFO
Fan Tray 1 fan-ctrl-0 1, Front to Back Airflow - AFO
Fan Tray 2 fan-ctrl-1 2, Front to Back Airflow - AFO
Fan Tray 3 fan-ctrl-1 3, Front to Back Airflow - AFO
Fan Tray 4 fan-ctrl-2 4, Front to Back Airflow - AFO
thanks
Paul
------------------------------
PAUL WORMAN
------------------------------
Original Message:
Sent: 06-05-2023 18:14
From: GRZEGORZ DACKA
Subject: QFX5120-48Y not recognising 10GE-T SFP
Hello
Pls show
show chassis hardware
------------------------------
Grzegorz Dacka
Original Message:
Sent: 06-05-2023 08:08
From: PAUL WORMAN
Subject: QFX5120-48Y not recognising 10GE-T SFP
Hi All,
Did anyone get an answer to this, as I have run into similar on a new QFX5120-48Y?
thanks in advance1
Paul
------------------------------
PAUL WORMAN
Original Message:
Sent: 11-04-2022 11:13
From: Jan Vandenberghe
Subject: QFX5120-48Y not recognising 10GE-T SFP
Hi James,
Have you been able to solve this problem ?
I'm facing a similar issue with an EX4600 and 10GE-T SFPs
Thanks
Jan
------------------------------
Jan Vandenberghe
Original Message:
Sent: 04-07-2022 07:59
From: JAMES HOOK
Subject: QFX5120-48Y not recognising 10GE-T SFP
A colleague has an issue with a 5120 and 10GE-T SFP's.
When 10G-SR optics are in sfp-0/0/6 the port is up and SFP shows in 'show chassis hardware'
When 10G-T SFP inserted the following logs are generated:
Apr 7 18:35:40 SW-01 fpc0 FAILED(-1) read of SFP eeprom for port: 6
Apr 7 18:35:40 SW-01 fpc0 sfp-0/0/6(6), SFP 6: in sfp_read_range, failed to read SFP EEPROM address 0
Apr 7 18:35:41 SW-01 fpc0 Unknown transceiver type. Set to default OC3C
Apr 7 18:35:41 SW-01 fpc0 sfp-0/0/6(6), SFP 6: unknown OC3 optic type 0
And SFP details are not shown under show chassis hardware.
JUNOS Version 20.2R3.9 Flex.
Juniper branded SR and 10G-T SFPS
QFX-SFP-10GE-SR Part Number: 740-021308
JNP-SFPP-10GE-T Part Number: 740-083295
Many thanks
------------------------------
JAMES
------------------------------