Junos OS

 View Only
last person joined: yesterday 

Ask questions and share experiences about Junos OS.
  • 1.  Packet capture on a MPLS network

    Posted 07-19-2023 12:13

    Hi,

    I have a couple of SRX300 acting as PEs on which i would like to perform a packet capture. I especially want to capture packets related to a xconnect i created between a SRX300 and a Cisco ISR. On each access side of both PEs i have a host.

    I would like the packet capture to be performed on the mpls interface (towards the backbone) of one SRX300 so i can sample a couple of frames including some that brings a simple ping i am performing between the two hosts connected to each other thanks to the L2circuit.

    I tried a couple of scenario but none of them helped.

    Thanks in advance for your kind help.

    Regards,

    Jerems.



    ------------------------------
    Jeremie Rouzet
    ------------------------------


  • 2.  RE: Packet capture on a MPLS network
    Best Answer

    Posted 07-21-2023 06:34

    Here is the kb on setting up packet capture for branch SRX devices.

    https://supportportal.juniper.net/s/article/Includes-video-How-to-create-a-PCAP-packet-capture-on-a-SRX-branch-device?language=en_US



    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: Packet capture on a MPLS network

    Posted 07-31-2023 11:32

    Thank you @spuluka !



    ------------------------------
    Jeremie Rouzet
    ------------------------------