Security

 View Only
last person joined: yesterday 

Securing your network and related platform configuration and troubleshooting with Juniper security technologies including Advance Threat Prevention, Cloud-Based Management Services, Cloud-delivered Security, Cloud Workload Protection, DDoS, Juniper Secure and other solutions.

  • 1.  OID to monitor IPSEC Tunnel in SRX

    Posted 12 days ago

    Hi all,

    Can someone share with which OID need to take and load it if i have NMS such as PRTG/LibreNMS/zabbix and etc to monitor IPSEC Tunnel in SRX?

    Thanks and appreciate any feedback



  • 2.  RE: OID to monitor IPSEC Tunnel in SRX

    Posted 12 days ago

    You can see the various options on the Juniper MIB explorer here.

    https://apps.juniper.net/mib-explorer/navigate?software=Junos%20OS&release=22.4R1&name=jnxVpnMIB&oid=1.3.6.1.4.1.2636.3.26

    Name:
    jnxVpnMIB
    OID:
    1.3.6.1.4.1.2636.3.26
    Description:
    Extended VPN MIB module to support VPN Identifier for locally switched
    L2 circuits.
    Mib Name:
    JUNIPER-VPN-MIB
    Mib Path:
    /iso/org/dod/internet/private/enterprises/juniperMIB/jnxMibs/jnxVpnMIB



    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------

    Original Message


  • 3.  RE: OID to monitor IPSEC Tunnel in SRX

    Posted 12 days ago

    Hi Spuluka,

    I'm refering to IPSEC VPN. Just want to know whether u have exprience anyone success to monitor juniper ipsec vpn using NMS like solarwind/prtg n etc?

    Thanks


    Original Message


  • 4.  RE: OID to monitor IPSEC Tunnel in SRX

    Posted 10 days ago

    That is the OID area for IPSEC monitoring.  You would select the specific parameters you want to monitor and enter the OID values per the monitoring platform.

    I had not used Juniper NMS but setup monitoring pages for tunnel up and down listings in Nagios using these SNMP polling methods years ago in a previous position.



    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------

    Original Message


  • 5.  RE: OID to monitor IPSEC Tunnel in SRX

    Posted 10 days ago

    Hi Spuluka,

    Noted. Thanks for your feedback. I will try look into that Nagios.


    Original Message