Routing

Hello all, 

I have a custom policy statement, which advertises aggregate routes towards a BGP peer.

I want to amend this export filter, to only allow the advertisement of aggregate routes 'IF' a specific route exists in the routing table (it's a VRF).

My idea is to inject a static route into the VRF from multiple locations, and amend the export policy statement to include a conditional statement (if-route-exists), to only send the aggregate route towards the peer, if the routing-table is fully converged (static route received)

Existing:

set policy-options policy-statement send-aggregate-SL term accept-specific-routes from protocol aggregate

set policy-options policy-statement send-aggregate-SL term accept-specific-routes from route-filter x.x.x.x/10 exact

set policy-options policy-statement send-aggregate-SL term accept-specific-routes then accept

set policy-options policy-statement send-aggregate-SL term suppress-specific-routes then reject

Proposed: 

set policy-options policy-statement send-aggregate-SL term accept-specific-routes from protocol aggregate

set policy-options policy-statement send-aggregate-SL term accept-specific-routes from route-filter x.x.x.x/10 exact

set policy-options policy-statement send-aggregate-SL term accept-specific-routes from condition receive_static_route

set policy-options policy-statement send-aggregate-SL term accept-specific-routes then accept

set policy-options policy-statement send-aggregate-SL term suppress-specific-routes then reject

set policy-options condition receive_static_route if-route-exists 192.168.1.1/32

set policy-options condition receive_static_route if-route-exists table vrfid45.inet.0

Any advice or guidance would be greatly appreciated!

Thank you