Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
I am finally getting back to this EoSVR scenario and testing connecting the second EoSVR bridge. I have it configured the same as the first one, but with different names for the service, service routes, and bridge. The configs are applied and not showing any errors. I have a device connected to VLAN 11 at location C, it is trying to ask for an IP via DHCP, which I can see via PCAPs that the DHCP service at the hub is receiving and responding to, but the DHCP response is not making it back across the EoSVR Bridge to the device. I can't find out what would be different between the two EoSVR bridge configurations, but the second one just isn't getting traffic back to location c.
The issue was on my end, I missed a setting on one side of the EoSVR Bridge. It is now connected and running! Also, it looks that as of Version 5.5.3 , the external switch is no longer required. Both of my EoSVR Bridges are using the same VLAN and I'm not getting any error or seeing any issues.