Routing

 View Only
last person joined: 20 hours ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.
  • 1.  Juniper SRX Firewall VRRP not able to access the VLAN

    This message was posted by a user wishing to remain anonymous
    Posted 18 days ago
    This message was posted by a user wishing to remain anonymous

    Hi,
    I am facing an issue with Juniper SRX Firewalls, configured firewalls using VRRP but i am not able to access the Second VRRP firewall irb. (Refer attached first Picture)
    Two Firewalls A and B Configured with VRRP and a trunk port between each other with all allowed vlan members.
    Other two firewalls X and Y also Configured with VRRP and a trunk port between each other with all allowed vlan members.
    A Firewall Connected to X and B firewall Connected to Y.
    When i am trying to access the management VLAN of Firewall B or Firewall Y, I am not able to access from the switch that is connected to A and B. (Refer attached first Picture)
    And also, one more issue is when i reboot Firewall X, the traffic to the computers Location 2 that are connected to Y not reaching from Location 1. (Refer attached second Picture).

    Please advise, what is the best way to resolve this issue without changing the current design.


  • 2.  RE: Juniper SRX Firewall VRRP not able to access the VLAN

    Posted 18 days ago
    Are the SRX configured in packet mode as router only or as the normal shipped flow mode as a firewall?

    How are the routing subnets exchanged between site 1 and site 2? OSPF, BGP, static routes?

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------