Switching

 View Only
last person joined: 4 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

ISSU upgrade fail "Member not in single node vc : Invalid"

  • 1.  ISSU upgrade fail "Member not in single node vc : Invalid"

    Posted 26 days ago
    I did test for use ISSU upgrade in QFX5120-48Y-8C as 2 members of virtual chassis. I was expecting it runs well but something wrong is occured.
    {master:0}
    root@SW1> request system software in-service-upgrade /var/tmp/jinstall-host-qfx-5e-flex-x86-64-21.2R3.8-secure-signed.tgz                  
    Jan 13 13:40:04
    [Jan 13 13:40:04]:ISSU: Validating Image
    
     PRE ISSU CHECK:
     ---------------
     PFE Status                            : Online
     Member Id zero                        : Valid
     VC not in mixed or fabric mode        : Valid
     Member not in single node vc          : Invalid
     BFD minimum-interval check done       : Valid
     GRES enabled                          : Valid
     NSR enabled                           : Valid
     drop-all-tcp not configured           : Valid
     Ready for ISSU                        : Valid
    
    error: System not ready for ISSU.
    error: aborting ISSU
    [Jan 13 13:40:05]:ISSU: IDLE
    
    {master:0}
    root@SW1>​

    What could be meant by on invalid one? Here is my setup of virtual chassis.
    {master:0}
    root@SW1> show virtual-chassis 
    Jan 13 13:40:24
    
    Preprovisioned Virtual Chassis
    Virtual Chassis ID: 994b.0083.fb13
    Virtual Chassis Mode: Enabled
                                                    Mstr           Mixed Route Neighbor List
    Member ID  Status   Serial No    Model          prio  Role      Mode  Mode ID  Interface
    0 (FPC 0)  Prsnt    xxxxxxxxxxxx qfx5120-48y-8c 129   Master*      N  VC   1  vcp-255/0/48
    1 (FPC 1)  Prsnt    xxxxxxxxxxxx qfx5120-48y-8c 129   Backup       N  VC   0  vcp-255/0/48​

    Both Junos version are running in 19.1R3-S2.3 flex.