hi Team,
please help me out .. i'm not able see inet.3 table on vMX.
root@R1> show route table ?
Possible completions:
<table> Name of routing table
Customer100.inet.0
Customer100.inet6.0
bgp.l3vpn.0
inet.0
inet6.0
iso.0
l2circuit.0
mpls.0
root@R1>
set chassis network-services enhanced-ip
set interfaces ge-0/0/0 unit 0 family inet address 12.0.0.1/24
set interfaces ge-0/0/0 unit 0 family iso
set interfaces ge-0/0/0 unit 0 family mpls
set interfaces ge-0/0/4 vlan-tagging
set interfaces ge-0/0/4 encapsulation vlan-ccc
set interfaces ge-0/0/4 unit 0 encapsulation vlan-ccc
set interfaces ge-0/0/4 unit 0 vlan-id 513
set interfaces ge-0/0/4 unit 0 family ccc
set interfaces ge-0/0/4 unit 100 vlan-id 100
set interfaces ge-0/0/4 unit 100 family inet address 11.0.0.1/24
set interfaces fxp0 unit 0 family inet dhcp vendor-id Juniper-vmx-VM62BAAC662F
set interfaces lo0 unit 0 family inet address 1.1.1.1/32
set interfaces lo0 unit 0 family iso address 49.0000.0000.0001.00
set routing-options router-id 1.1.1.1
set routing-options autonomous-system 12
set protocols rsvp traceoptions file messages
set protocols rsvp traceoptions flag error
set protocols rsvp interface ge-0/0/0.0
set protocols mpls traffic-engineering bgp-igp
set protocols mpls label-switched-path to_R8_from_R1 no-install-to-address
set protocols mpls label-switched-path to_R8_from_R1 to 8.8.8.8
set protocols mpls label-switched-path to_R8_from_R1 record
set protocols mpls label-switched-path to_R8_from_R1 fast-reroute
set protocols mpls label-switched-path to_R8_from_R1 auto-bandwidth
set protocols mpls label-switched-path to_R8_from_R1 primary to_R8
set protocols mpls path to_R8 12.0.0.2
set protocols mpls path to_R8 24.0.0.4
set protocols mpls path to_R8 45.0.0.5
set protocols mpls path to_R8 58.0.0.8
set protocols mpls interface ge-0/0/0.0
set protocols bgp group PE type internal
set protocols bgp group PE local-address 1.1.1.1
set protocols bgp group PE neighbor 8.8.8.8 family inet-vpn unicast
set protocols bgp group PE neighbor 8.8.8.8 peer-as 12
set protocols isis traffic-engineering family inet shortcuts
set protocols isis level 2 wide-metrics-only
set protocols isis level 1 disable
set protocols isis interface ge-0/0/0.0 hello-padding disable
set protocols isis interface ge-0/0/0.0 point-to-point
set protocols isis interface ge-0/0/0.0 level 1 disable
set protocols isis interface lo0.0
set protocols ldp transport-address router-id
set protocols ldp interface ge-0/0/0.0
set protocols ldp interface lo0.0
set protocols ldp family inet
set protocols l2circuit neighbor 8.8.8.8 interface ge-0/0/4.0 virtual-circuit-id 513
set protocols l2circuit neighbor 8.8.8.8 interface ge-0/0/4.0 no-control-word
set routing-instances Customer100 instance-type vrf
set routing-instances Customer100 interface ge-0/0/4.100
set routing-instances Customer100 route-distinguisher 100:1
set routing-instances Customer100 vrf-target import target:100:1
set routing-instances Customer100 vrf-target export target:100:1
set routing-instances Customer100 vrf-table-label