SD-WAN

 View Only
last person joined: 9 days ago 

Ask questions and share experiences with SD-WAN and Session Smart Router (formerly 128T).

  • 1.  I want to get the up and down information of the interface from Conductor PCLI.

    Posted 02-19-2021 04:55
    Hi,

    Is it possible to get the up/down information of the router interface from Condoctor?

    I tried "show stats interface xxxxs" and "show stats device-interface xxxx" from Condoctor to find the up/down information, but I couldn't find it.
    Please tell me how to get the up/down information.
    Please help me.

    ------------------------------
    Kenji Akiyoshi
    ------------------------------


  • 2.  RE: I want to get the up and down information of the interface from Conductor PCLI.

     
    Posted 10-26-2022 13:50
    Sure, you can get all router based PCLI stats from the Conductor as well by adding the suffix "router <router-name>" to each command in the Conductor PCLI. For example on my Conductor, here are those same commands ran on my router named "seattle-site-02-ztp":

    # show device-interface router seattle-site-02-ztp
Mon 2021-02-22 15:49:16 UTC
✔ Retrieving device interface information...

========================================
 bumblebee.seattle-site-02-ztp:WAN1
========================================
 Type:                ethernet
 Forwarding:          true
 PCI Address:         0000:03:00.0
 MAC Address:         d0:50:99:9f:a2:f9

 Admin Status:        up
 Operational Status:  up
 Provisional Status:  unavailable
 Redundancy Status:   non-redundant
 Speed:               1 Gb/s
 Duplex:              full

 in-octets:                446287321882
 in-unicast-pkts:             466843417
 in-errors:                           0
 out-octets:               445891033856
 out-unicast-pkts:            465978714
 out-errors:                          0

 Plugin Info:         unavailable


========================================
 bumblebee.seattle-site-02-ztp:loopback
========================================
 Type:                host
 Forwarding:          true
 Mode:                host
 MAC Address:         c2:35:d1:46:f0:ce

 Admin Status:        up
 Operational Status:  up
 Provisional Status:  unavailable
 Redundancy Status:   non-redundant
 Speed:               1 Gb/s
 Duplex:              full

 in-octets:                    65521216
 in-unicast-pkts:                820867
 in-errors:                           0
 out-octets:                  903270494
 out-unicast-pkts:              1051713
 out-errors:                          0

 Plugin Info:         unavailable

Completed in 0.41 seconds​


    ------------------------------
    Adam Morris
    Sales Engineer
    WA
    (206) 617-4999
    ------------------------------

    Original Message


  • 3.  RE: I want to get the up and down information of the interface from Conductor PCLI.

    Posted 02-24-2021 00:45
    Hi,Mr.Adam Morris

    Thanks for the response.
    Thanks to you very much, I was able to get the up/down information of the router interface from the conductor.

    ------------------------------
    Kenji Akiyoshi
    ------------------------------

    Original Message