Routing

Please can anyone suggest what could be the likely problem with my two  SRX1400 , that was meant to be in cluster . but failed .

node 0

node 1

Node one seems to be an issue . 

Hi,

Please share the outputs of the below commands. 

• show chassis cluster information detail no-forwarding.
• show chassis cluster interfaces
• show chassis cluster status

Regards

Hello Shekhar,

I have attach the log to this response . 

Also for your information ,i did show chassis fpc pic-status

primary cluster

==============

 show chassis fpc pic-status
node0:
--------------------------------------------------------------------------
Slot 0   Online       SRX1k 10GE SYSIO
  PIC 0  Online       6x 1GE RJ45 3x 1GE SFP 3x 10GE SFP+
Slot 1   Online       SRX1k Dual Wide NPC+SPC Support Card
  PIC 0  Online       SPU Cp-Flow
Slot 2   Online       SRX3k 2x10GE XFP
  PIC 0  Online       2x 10GE-XFP
Slot 3   Online       BUILTIN NPC
  PIC 0  Online       NPC PIC

{primary:node0}

Secondary cluster 

====================

 show chassis fpc pic-status
node1:
--------------------------------------------------------------------------

{disabled:node1}

Attachment(s)

FW_CLUSTER LOGS.txt   19 KB 1 version

Thanks.

The control link between the nodes of the cluster is down.

Jul 12 13:28:48.043 : secondary->ineligible, reason: Control link failure
Jul 12 13:31:48.046 : ineligible->disabled, reason: Ineligible timer expired

Control link status: Down
    Server information:
        Server status : Running
        Server connected to None
    Client information:
        Client status : Inactive
        Client connected to None

Can you please check the control and fab connectivity between the two nodes of the cluster?

Regards

Sheetanshu