Routing

I am using GNS3.  I have 2 QFX devices configured for OSPF.  I see their hello packets to each other on wireshark but the 2 QFX devices don't see each other it seems.  They both show 0 received hello packets.  Can you take a look at my configs and tell me if you see what I am missing?

Site A config

system {
    host-name Site-A;
    syslog {
        user * {
            any emergency;
        }
        file messages {
            any notice;
            authorization info;
        }
        file interactive-commands {
            interactive-commands any;
        }
    }
    extensions {
        providers {
            juniper {
                license-type juniper deployment-scope commercial;
            }
            chef {
                license-type juniper deployment-scope commercial;
            }
        }
    }
}
interfaces {
    xe-0/0/0 {
        description "host 1";
        unit 0 {
            family ethernet-switching {
                vlan {
                    members VLAN10;
                }
            }
        }
    }
    xe-0/0/1 {
        description "uplink to site B";
        mtu 9192;
        unit 0 {
            family inet {
                address 10.10.10.1/30;
            }
        }
    }
    em1 {
        unit 0 {
            family inet {
                address 169.254.0.2/24;
            }
        }
    }
    irb {
        unit 10 {
            family inet {
                address 192.168.1.1/24;
            }
        }
    }
}
forwarding-options {
    storm-control-profiles default {
        all;
    }
}
protocols {
    ospf {
        area 0.0.0.0 {
            interface xe-0/0/1.0;
        }
    }
    igmp-snooping {
        vlan default;
    }
}
vlans {
    VLAN10 {
        vlan-id 10;
        l3-interface irb.10;
    }
    default {
        vlan-id 1;
    }
}

Site B config

system {
    host-name SITE-B;
    login {
        user vagrant {
            uid 2000;
            class super-user;
            authentication {
            }
        }
    }
    services {
        ssh {
            root-login allow;
        }
        netconf {
            ssh;
        }
        rest {
            http {
                port 8080;
            }
            enable-explorer;
        }
    }
    syslog {
        user * {
            any emergency;
        }
        file messages {
            any notice;
            authorization info;
        }
        file interactive-commands {
            interactive-commands any;
        }
    }
    extensions {
        providers {
            juniper {
                license-type juniper deployment-scope commercial;
            }
            chef {
                license-type juniper deployment-scope commercial;
            }
        }
    }
}
interfaces {
    xe-0/0/0 {
        description "Host 1";
        unit 0 {
            family ethernet-switching {
                vlan {
                    members VLAN20;
                }
            }
        }
    }
    xe-0/0/1 {
        description "Uplink to Site A";
        mtu 9192;
        unit 0 {
            family inet {
                address 10.10.10.2/30;
            }
        }
    }
    em0 {
        unit 0 {
            family inet {
                dhcp;
            }
        }
    }
    em1 {
        unit 0 {
            family inet {
                address 169.254.0.2/24;
            }
        }
    }
    irb {
        unit 20 {
            family inet {
                address 192.168.2.1/24;
            }
        }
    }
    lo0 {
        unit 0;
    }
}
forwarding-options {
    storm-control-profiles default {
        all;
    }
}
routing-options {
    router-id 192.168.1.1;
}
protocols {
    ospf {
        area 0.0.0.0 {
            interface xe-0/0/1.0;
        }
    }
    igmp-snooping {
        vlan default;
    }
}
vlans {
    VLAN20 {
        vlan-id 20;
        l3-interface irb.20;
    }
    default {
        vlan-id 1;
    }
}

Hi, can 10.10.10.1 ping  10.10.10.2?   If not, check these things...

• Make sure you are connecting the vQFX PFE (vFP) and RE (vCP)  using the em1 interfaces on both pfe and re
• Check "show chassis fpc" and you should see slot 0 Online/Testing
  

I'm using vQFX in EVE-NG.  I'm assuming the setup is similar in GNS3, but I haven't used GNS3 in years.

This video I did may help.  https://youtu.be/jZY5JhEoY9s

Hi Aaron.  It is nice to meet as I have utilized your videos from youtube in the past.  Thank you for those! 

I cannot ping 10.10.10.1 from 10.10.10.2 or vice versa. 

I am connecting the PFE and the RE using em1 and they seem to be communicating fine over that connection. 

The show chassis fpc does show online/testing.

Does my config look okay as far as forming an OSPF adjacency?  Like I said, when I capture packets using wireshark on the connection between the two different routing engines I can see the hello packets from each of 2 routing engines. I gave them unique router ids, I confirmed the hello interval is the same between the two.