Switching

 View Only
last person joined: 6 hours ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  EX4100 MVR

    Posted 04-05-2023 09:21

    I am trying to use MVR on the EX4100 switch but it does not seem to forward traffic to the customer port?
    This config worked on EX4300.

    Currently the switch has 22.2R1.12 on it.

    set interfaces ge-0/0/1 description STB
    set interfaces ge-0/0/1 mtu 9216
    set interfaces ge-0/0/1 unit 0 family ethernet-switching interface-mode access
    set interfaces ge-0/0/1 unit 0 family ethernet-switching vlan members vlan1000-cvlan
    
    
    set interfaces xe-0/2/3 description Uplink
    set interfaces xe-0/2/3 flexible-vlan-tagging
    set interfaces xe-0/2/3 mtu 9216
    set interfaces xe-0/2/3 encapsulation extended-vlan-bridge
    set interfaces xe-0/2/3 unit 0 family ethernet-switching interface-mode trunk
    set interfaces xe-0/2/3 unit 0 family ethernet-switching vlan members vlan482
    
    
    set vlans vlan1000-cvlan vlan-id 1000
    set vlans vlan482 vlan-id 482
    
    
    set protocols igmp-snooping vlan vlan1000-cvlan data-forwarding receiver source-list vlan482
    set protocols igmp-snooping vlan vlan1000-cvlan data-forwarding receiver mode proxy
    set protocols igmp-snooping vlan vlan1000-cvlan interface xe-0/2/3.0 multicast-router-interface
    set protocols igmp-snooping vlan vlan482 data-forwarding source groups 224.0.48.0/20
    set protocols igmp-snooping vlan vlan482 interface xe-0/2/3.0 multicast-router-interface
    
    


    ------------------------------
    ATLE STRAND
    ------------------------------


  • 2.  RE: EX4100 MVR

    Posted 04-11-2023 12:23

    It seems i ran into a bug where igmp-snooping was broken. https://prsearch.juniper.net/problemreport/PR1681478

    After upgrade to 22.4R1-S2.1 it works as it should.



    ------------------------------
    ATLE STRAND
    ------------------------------