Wireless

 View Only
last person joined: 9 days ago 

Ask questions and share experiences with Mist APs, Marvis, and all things wireless and Wi-Fi.
  • 1.  Do the AP34 and AP34E support RTT (round trip time) measurements?

    Posted 03-20-2023 15:51

    Do the AP34 and AP34E support RTT (round trip time) measurements?



    ------------------------------
    Andrew Meszaros
    ------------------------------


  • 2.  RE: Do the AP34 and AP34E support RTT (round trip time) measurements?

    Posted 03-31-2023 19:20

    Hello Andrew,

    In MIST SLE for Wired you can find information about RTT measurements.

    So, you can reach through the throughput under it you will find Network inside it latency and jitter.

    Network

    The Network Classifier represents issues related to the round trip time (RTT) for messages from the switch to the cloud. It is split up into two Sub-classifiers: Latency and Jitter.

    Latency

    The Latency is calculated using the average value of RTT over a period of time.

    Jitter

    Jitter is calculated using the variation (standard deviation) of RTT within a small time period (last 5/10 min.) for a particular switch or site and comparing this value with the overall deviation of RTT over a longer period of time (day/week).

    I attached above screenshot, hope it helps ..