I am trying to install Junos OS 20.2R2.11 on SRX1500 device. Here's the error I am getting during the booting process -
Prefetching /usr/sbin/lacpd ...
Prefetching /usr/sbin/chassisd ...
Timecounter "KVMCLOCK" frequency 1000000000 Hz quality 2000
kern.timecounter.hardware: KVMCLOCK -> KVMCLOCK
@ 1679632152 [2023-03-24 04:29:12 UTC] mountlater start
@ 1679632156 [2023-03-24 04:29:16 UTC] mountlater done
junos.kern.fpc_fips: 0 -> 1
junos.kern.iri_ipsec_shared_sa: 0 -> 1
start fipsd to setup internal sa
RE: no key
Starting jlaunchhelperd.
Invoking jdid_diag_mode_setup.sh on junos
Starting cron.
Fri Mar 24 04:29:17 UTC 2023
FreeBSD/amd64 (Amnesiac) (ttyu0)
login: Mar 24 04:29:18 jlaunchd: mib-process (PID 19773) started
Mar 24 04:29:18 jlaunchd: Registered PID 19773(mib-process): new process
Mar 24 04:29:18 jlaunchd: Registered PID 19777(routing): exec_command
Mar 24 04:29:18 jlaunchd: routing (PID 19777) started
Mar 24 04:29:18 jlaunchd: Registered PID 19777(routing): new process
Mar 24 04:29:18 jlaunchd: Registered PID 19778(l2-learning): exec_command
Mar 24 04:29:18 jlaunchd: l2-learning (PID 19778) started
Mar 24 04:29:18 jlaunchd: Registered PID 19778(l2-learning): new process
Mar 24 04:29:18 jlaunchd: Registered PID 19779(inet-process): exec_command
Mar 24 04:29:18 jlaunchd: inet-process (PID 19779) started
Mar 24 04:29:18 jlaunchd: Registered PID 19779(inet-process): new process
Mar 24 04:29:18 jlaunchd: Registered PID 19780(pfed): exec_command
Mar 24 04:29:18 jlaunchd: pfed (PID 19780) started
Mar 24 04:29:18 jlaunchd: Registered PID 19780(pfed): new process
Mar 24 04:29:18 jlaunchd: Registered PID 19781(class-of-service): exec_command
Mar 24 04:29:18 jlaunchd: class-of-service (PID 19781) started
Mar 24 04:29:18 jlaunchd: Registered PID 19781(class-of-service): new process
Mar 24 04:29:18 jlaunchd: Registered PID 19782(ipsec-key-management): exec_command
Mar 24 04:29:18 jlaunchd: ipsec-key-management (PID 19782) started
Mar 24 04:29:18 jlaunchd: Registered PID 19782(ipsec-key-management): new process
Mar 24 04:29:18 jlaunchd: Registered PID 19783(periodic-packet-services): exec_command
Mar 24 04:29:18 jlaunchd: periodic-packet-services (PID 19783) started
Mar 24 04:29:18 jlaunchd: Registered PID 19783(periodic-packet-services): new process
Mar 24 04:29:18 jlaunchd: Registered PID 19784(firewall): exec_command
Mar 24 04:29:18 jlaunchd: firewall (PID 19784) started
Mar 24 04:29:18 jlaunchd: Registered PID 19784(firewall): new process
Mar 24 04:29:18 jlaunchd: Registered PID 19785(internal-routing-service): exec_command
igb 0000:07:00.1: Detected Tx Unit Hang
Tx Queue <0>
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]
time_stamp <100000f8f>
next_to_watch <ffff880156cd1000>
jiffies <10000164c>
desc.status <a8000>
igb 0000:07:00.1: Detected Tx Unit Hang
Tx Queue <0>
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]
time_stamp <100000f8f>
next_to_watch <ffff880156cd1000>
jiffies <100001e1c>
desc.status <a8000>
igb 0000:07:00.1: Detected Tx Unit Hang
Tx Queue <0>
TDH <0>
TDT <1>
next_to_use <1>
next_to_clean <0>
buffer_info[next_to_clean]
time_stamp <100000f8f>
next_to_watch <ffff880156cd1000>
jiffies <1000025ec>
desc.status <a8000>
icp_qa_al err: adf_init_all: failed to initialize accelerator
icp_qa_al err: adf_init_devices: failed init accel 0
icp_qa_al err: adf_ctl_ioctl_dev_start: failed call to adf_init_devices
Error: failed to start device 0
Stopping Bootlog daemon: bootlogd.
icp_qa_al err: adf_subsystemStart: Failed to start subservice QAT
icp_qa_al err: adf_do_init: adf_subsystemInit error, stopping and shutting down
icp_qa_al err: adf_init_all: failed to initialize accelerator
icp_qa_al err: adf_init_devices: failed init accel 0
icp_qa_al err: adf_ctl_ioctl_dev_start: failed call to adf_init_devices
icp_qa_al err: adf_processes_open: Device not yet ready.
Feel free to discuss on this if you have seen this error before. Let me know if you need more information.
------------------------------
Shayon Deb Roy
------------------------------