This message was posted by a user wishing to remain anonymous
I need to know why my config is not working, and if you can advice me to make it correct.
We are receiving two default routes from ISP-A and from ISP-B. The current ISP-A is preferred based on local-preference.
I need to keep this priority, for all the traffic through ISP-A, but i want to use ISP-B as well for one destination Subnet. So default route 0.0.0.0/0 from ISP-A is injected as a primary to my Site (higher Local-Prefence).
For this purpose I have done the configuration as below, but is not working.
x.x.x.x is the destination_Test_IP Range that i can use for test.
#set policy-options policy-statement ml_to_retn_condev_allow term 10 from route-filter x.x.x.x exact
#set policy-options policy-statement ml_to_retn_condev_allow term 10 then accept
#set policy-options policy-statement ml_to_retn_condev_deny term 10 from route-filter x.x.x.x exact
#set policy-options policy-statement ml_to_retn_condev_deny term 10 then reject
import this statemnt in BGP
#set protocols bgp group Upstream neighbor 10.0.1.2 import ml_to_retn_condev_allow
#set protocols bgp group Upstream neighbor 10.0.2.2 import ml_to_retn_condev_deny
Now, is this possible technically and if yes, can you give us an hand regard to this by advising with the config?