Hi,
You're right. The inter-domain sandbox does not show up on the vLabs index page. This is because of some planned updates to the website.
Please use this link (also available in the original post) to launch the inter-domain BGP-CT vLabs blueprint. You can access the sandbox after reserving the topology.
https://portal.cloudlabs.juniper.net/RM/Diagram/Index/751bf0be-3b98-4bc0-ba0e-8fd57737142e?diagramType=Topology
Thanks,
Rekha
------------------------------
Rekha Jeromias
------------------------------
Original Message:
Sent: 06-06-2023 10:46
From: kronicklez
Subject: BGP-CT vLabs demonstration
Hi Rekha,
I'm not found inter-domain lab in vLabs. Can u pointing it?
Thanks and appreciate your feedback
Original Message:
Sent: 06-06-2023 06:21
From: Rekha Jeromias
Subject: BGP-CT vLabs demonstration
Hello Everyone!
Are you familiar with the new BGP transport layer address family, SAFI 76 - BGP Classful Transport (BGP-CT)?
With BGP-CT, you can get several benefits like intent-driven inter-domain interoperability using network-slicing mechanisms, optimizing network operations with improved SLA performance, and leveraging network deployments with support for a wide range of protocols, to name a few.
If you 'd like to get some hands-on experience on the technology, there are two free lab-based demonstrations on BGP-CT available in Juniper vLabs.
Check it out now!
To get started on the vlab:
- Click on the BGP-CT vlab sandbox link.
- Sign up or log in to Juniper vLabs.
- Reserve the vLab using the graphical interface.
The topology-specific details will be provided after you've logged in.
For more help with vLabs, refer to the following useful resources:
For more information on BGP-CT, see the following TechLibrary Documentation:
------------------------------
Rekha Jeromias
------------------------------