Switching

 View Only
last person joined: 11 hours ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  BFD over BGP flaps from time to time with reason:Detect Timer Expiry

    Posted 04-19-2023 09:42

    Hi,

    BFD over BGP has the following issue.  BFD flap from time to time , while bgp session is restored and also bfd session.
    Do you know what to check? switch qfx5120.   spine-leaf topology

    logs:
    DAEMON-4-BFDD_STATE_UP_TO_DOWN: BFD Session 172.31.101.4 (IFL 0) state Up -> Down LD/RD(16/23) Up time:7w0d 17:02 Local diag: CtlExpire Remote diag: None Reason: Detect Timer Expiry.



    ------------------------------
    CRISTIAN CHIRATCU
    ------------------------------


  • 2.  RE: BFD over BGP flaps from time to time with reason:Detect Timer Expiry

    Posted 04-19-2023 10:39

    This will generally indicate some kind of link or interface problem between the two devices.  Here is the Juniper article of all the items to check.

    https://supportportal.juniper.net/s/article/M-MX-T-Troubleshooting-Checklist-BFD?language=en_US#BFD_flap



    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: BFD over BGP flaps from time to time with reason:Detect Timer Expiry

    Posted 05-07-2024 00:59

    the JUNOS OS was end of support. We upgraded the software and now everything is fine.



    ------------------------------
    CRISTIAN CHIRATCU
    ------------------------------