View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

Alarms generated by MPC4E-3D-32XGE-SFPP, need advice...

  • 1.  Alarms generated by MPC4E-3D-32XGE-SFPP, need advice...

    Posted 03-23-2023 09:02

    We have a Juniper MPC4E-3D-32XGE-SFPP that has been performing fine for the last two years but is starting to generate alarm messages in the logs:

    This error comes up every minute or so:

    fpc10 Error: /fpc/10/pfe/0/cm/0/PQ3_Chip/0/CMERROR_PQ3_DDR_1_BIT_MINOR (0x160001), scope: board, category: memory, severity: minor, module: PQ3 Chip, type: PQ3 DDR single bit minor error

    This error comes up frequently, between 2 to 15 minutes apart:

    chassisd[17838]: CHASSISD_FPC_ASIC_ERROR: <FPC 10> ASIC Error detected errorno 0x00160001 (null)

    I'm guessing that the errors are related, but I can't find any information on the second message.  Has anyone see this before?

    Bob Crossman