Switching

Hi There. It seems you are trying to run LACP over a L2 service. Please keep in mind that LACP frames are native or untagged so therefore your switch will send LACP frames to the ISP as untagged. This means the ISP will need to transport the frame natively ...

In my case, I have 2 ISP connection between Junos devices. First ISP EX4400(ge-0/0/14)

Hi Suraj Singh, I hope this example will help you. https://supportportal.juniper.net/s/article/LACP-between-two-devices-with-a-transit-device-in-between-using-Layer2-Protocol-Tunneling?language=en_US In this example ae0 interface configured as ...

Hi Techie, Here is the Juniper documentation page around the Interface Range command: https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/interfaces-fundamentals/topics/task/interface-ranges.html I've just tested this ...

Thanks for the reply, can this be done in a range?

Each port would be disabled by setting this at the port level. set ge-0/0/0 disable https://www.juniper.net/documentation/us/en/software/junos/interfaces-ethernet-switches/topics/topic-map/switches-interface-physical.html#id-10219968 ------------------------------ ...

Hello All, we have vendors and students that can patch in to a LAN drop thoughout the district. I'd like to disable all unused ports in our IDFs. Any help is appreciated