Switching

Five switches are stacked which are EX4200-24f, These switches are connected to gateway router through uplinks and default route is created having next-hop is gateway router directly connected to these stacked switches and working fine. after that these ...

Hi There. It seems you are trying to run LACP over a L2 service. Please keep in mind that LACP frames are native or untagged so therefore your switch will send LACP frames to the ISP as untagged. This means the ISP will need to transport the frame natively ...

In my case, I have 2 ISP connection between Junos devices. First ISP EX4400(ge-0/0/14)

Hi Suraj Singh, I hope this example will help you. https://supportportal.juniper.net/s/article/LACP-between-two-devices-with-a-transit-device-in-between-using-Layer2-Protocol-Tunneling?language=en_US In this example ae0 interface configured as ...

Hi Techie, Here is the Juniper documentation page around the Interface Range command: https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/interfaces-fundamentals/topics/task/interface-ranges.html I've just tested this ...

Thanks for the reply, can this be done in a range?

Each port would be disabled by setting this at the port level. set ge-0/0/0 disable https://www.juniper.net/documentation/us/en/software/junos/interfaces-ethernet-switches/topics/topic-map/switches-interface-physical.html#id-10219968 ------------------------------ ...