View Only
last person joined: yesterday 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Documentation Knowledge Base Day One Books Free Trial

Latest Discussion Posts

  • Hi there, This is my work configuration for "preprovisioned" option configuration on two EX4300 switches. > show configuration virtual-chassis preprovisioned; id 0631.5812.6055; no-split-detection; member 0 { role routing-engine; serial-number ...

  • Hi Muhammad, I don't believe these can be used together in the same VC as they both run completely different versions of Junos and have different config between the 2 models. Virtual chassis requires the same version of Junos to operate properly. ...

  • Have you added to the configuration the mixed mode setting to insure the ex4200 are compatible. request virtual-chassis mode mixed ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, ...

  • Hi , We have ex4200 7switches, but primary switch get problem, therefore we have replaced with Ex4300, but now facing issues with whole network, all device getting disconnected, however 6 Ex4200 and 1 Ex4300(primary) are up in Virtual chassis. Are ...

  • Profile Picture

    RE: EX4300 Virtual-Chassis Re-order

    This message was posted by a user wishing to remain anonymous admin@ex1> request virtual-chassis vc-port set interface vcp-255/1/0 member 0 admin@ex1> request virtual-chassis vc-port set interface vcp-255/1/1 member 0 admin@ex1# show virtual-chassis ...

  • Hi, If possible, could you share the configuration of virtual-chassis itself? ------------------------------ FARID AKHUNDOV ------------------------------

  • Profile Picture

    EX4300 Virtual-Chassis Re-order

    This message was posted by a user wishing to remain anonymous A customer of mine wants to renumber his VC of EX4300s. They changed the position of the devices in the cabinet and want to organize the stack according to this new order. Is ...


  • AI-Driven Support via JSI

    Get AI-driven support by connecting your devices to Juniper Support Insights (JSI). Join one of our upcoming “Jumpstart JSI Ask the Experts” meetups to learn more about JSI and ask the panel of experts your questions. Select the session that best suits your schedule:

    Tuesday, June 25 from 8:00-8:45PM PT: Register Now
    Wednesday, June 26 from 8:00-8:45AM PT: Register Now

Unanswered Posts

Top Contributors in the Community